Check Out Our Website!
Want it today?Call our Traverse City or Suttons Bay locations to confirm on-hand inventory!
Want it today? Call to confirm on-hand inventory! In Traverse City: 231-947-1400 and Suttons Bay: 231-271-0010
For use in Kwikset-brand interior/privacy locksets; conveniently stores above door for ease of use.
Kwikset Latch Collar, 6-Way, Round Face, Plain
Commonly referred to as "Pickle Fork." Use for servicing cylinders.
Standard on non-U.L. locksets. Full lip square corner. 2-1/4"H, 1-5/8"CTC.
Interchangeable face places - round corner, square corner and drive-in.
For the Maximum Security deadbolts. Standard on Nos.780 and 785. 1-3/4" inner CTC, 3" outer CTC. 3-5/8"H x 1-1/4"W. 3-hour fire rating with U.L. Titan and 1-1/2 hour fire rating with U.L. Kwikset locks and latch bolts.
Allows you to remove the cylinder plug from all Schlage pin and tumbler keyed products without losing the top pins and springs during the re-keying process.
Strike plate for interior or exterior metal frame doors; commercial grade; 1-1/4" x 4-7/8" square corners.
Square corner faceplate.Works with a 5/16" Star drive. Used on old style passage door locksets. Includes 1 latch and 1 set of installation screws. 1-1/32" x 2-1/4".
Steel adjustable deadlatch core for Kwikset Security, Maximum Security, Ultramax Security entry knobs and levers.
Steel adjustable deadlatch with round corner, square corner, & drive-in face plates for Kwikset Security, Maximum Security, Ultramax Security entry knobs and levers.
Steel adjustable plain latch with round corner, square corner, & drive-in face plates for Kwikset passage knobs and levers.
For exterior doors. Replaces 3 different latches. Faceplate options square and round corners or circular drive-in. Circular drive-in option requires 1" bore, standard. Fits 2-3/8" or 2-3/4" backsets housing diameter 7/8".
Cylindrical deadlocking latch with 1/2" throw; U.L. Approved 3-Hour Fire Rating, ANSI Grade 2. 1-1/8 x 2-1/4 faceplate.
Use when re-keying Kwikset & Titan locksets; follows cylinder plug during removal to keep top pins and springs in cylinder plug.
SmartKey Rekeying kit includes a SmartKey learn tool, 4 pre-cut replacement "everyday" keys and 2 pre-cut "temporary" keys.
Unguarded Latch - For passage and privacy locksets; SV series standard duty cylindrical knob and SK series lever locksets; the square face latch bolt has a 2-3/8" backset; UL listed for "A label" single swing doors.
Guarded Latch - For entry, storeroom and classroom locksets; Grade 2 with a 1/2" throw and a 2-3/8" backset; UL listed with a dead lasting function.
1"W x 2-1/4"H front. For Kwikset applications. May also be used in place of a plain latch for applications requiring this backset. Polished brass finish.
Designed to measure the key cuts on any Schlage key (Except SFIC) to determine what size pins should go in each chamber of the plug for re-keying purposes.
Ball bearing const cores. Pack of 1,000.
Fast routing of strike and latch plates. Includes high-speed steel router bit No.43670. Will route the following sizes: Strike plates; 1-1/8" x 2-3/4", 1-1/2" x 2-1/4" and 1-1/2" x 2-3/4". Latch plate: 1" x 2-1/4", 1-1/8" x 2-1/4" and 1-1/8" x 2-3/4".
A tool for resetting the SmartKey cylinder if it has been improperly programmed.
Kwikset Top Pin, Regular, Standard, 0.18 in Length
Kwikset Key Ball, Steel
Kwikset Lock Bottom Pin, Series: Contemporary Style, NO 1, 0.172 in Length, Gold, For Interior Doors
Kwikset Lock Bottom Pin, Series: Contemporary Style, NO 2, 0.195 in Length, Gold, For Interior Doors
Kwikset Lock Bottom Pin, Series: Contemporary Style, NO 3, 0.218 in Length, Gold, For Interior Doors
Kwikset Lock Bottom Pin, Series: Contemporary Style, NO 4, 0.241 in Length, Gold, For Interior Doors
Back to top