Check Out Our Website!
Want it today?Call our Traverse City or Suttons Bay locations to confirm on-hand inventory!
Want it today? Call to confirm on-hand inventory! In Traverse City: 231-947-1400 and Suttons Bay: 231-271-0010
Oil-less, 2 gallon tank with 6 piece accessories. 100 psi maximum pressure. 1.5 CFM/40 psi; 120V/60HZ/3 HP.
2 gallon oil free air compressor. 1.1 cfm's at 40 psi. Lightweight/portable. Quiet operation, 75dB. Air regulator and quick coupler included. Max psi 100.
Ultra quiet and ultra light lube-less pump compressor. Ideal for a range of finish and trim projects, as well as for home improvement jobs, hobbies and crafts. Lightweight, portable and easy to maintain. The heavy-duty induction motor is efficient for long life operation. The oil-free pump design and maintenance free. Weighs only 20 lbs.
Oil-free pump design for reliability and no maintenance. Low amp motor starts easily in cold weather or with extension cord. Upgraded shroud, handle and console cover protect vital components, makes unit easier to carry and includes cord wrap. Two regulated, factory installed air couplers to easily support two users. Water drain valve and rubber feet. Specs: 120 volt, 150 PSI, 3.7 SCFM at 40 PSI and 2.6 SCFM at 90 PSI for fast recovery time. 34 lbs. tool weight. Includes: Compressor and operating manual.
Designed with the professional contractor in mind. The lightweight and compact design ensure easy portability combined with the ultra quiet operation makes the compressor the ideal finish and trim unit. Long life induction motor and oil free pump design eliminate the need for oil or regular maintenance. Integrated control panel for easy access to couplers and pressure control knob; highly visible gauges. Rugged roll cage protects critical components. 68 dB A for ultra quiet operation. 4 amps at 115 volts. SCFM at 90 PSI 0.7. Maximum pressure 135 psi. Ultra lightweight at only 21 lbs.
6 gallon oil free Pancake compressor delivers up to 2.6 SCFM at 90 psi. Only 14" in diameter and 33 lbs. for easy portability. It's light enough to carry and get in and out of the jobsite. Long life, maintenance free pump for convenient on going uses. At just 80 dBA, this compressor offers the user a quiet work environment. Integrated control panel helps vital compressor components to be protected against tough jobsite conditions. Includes 2 Universal couplers to easily support 2 users. Ideal for trim and finish applications including installing molding, cabinetry or window/door casings.
Oil-free pump design for reliability and no maintenance. Low amp motor starts easily in cold weather or with extension cord. Upgraded shroud, handle and console cover protect vital components, makes unit easier to carry and includes cord wrap. Two regulated, factory installed air couplers to easily support two users. Water drain valve and rubber feet. Specs: 120 volt, 150 PSI, 3.7 SCFM at 40 PSI and 2.6 SCFM at 90 PSI for fast recovery time. 34 lbs. tool weight. Includes 13 Piece accessory kit - 25' x 1/4" PVC air hose wtih coupler and plug assembled, tire chuck with plug, blow gun with plug, tire gauge, blow gun with OSHA saftety nozzle, rubber tip and three inflator adaptors.
120V/60HZ/3.5 Peak HP; 5.2 CFM/40 psi; 4.2 CFM/90 psi. Max. pressure 115 psi. 15 piece accessories included.
.75 SCFM delivered at 90 PSI, 1.0 gallon tank and 135 max PSI enables more nails to be fired and provides quicker recovery. Durable oil free pump provides extended maintenance-free operation. Low 2.6 amp draw motor provides easy start-up and reduces breaker tripping. Belt drive. Low 71 dBA allows for quieter operation. Roll cage and control panel provide protection to key compressor components. Lightweight at only 24 lbs, thin (9.0") and compact design is easy to carry and store. Ball valve drain allows for quick and thorough tank draining. One quick coupler to easily support 1 nailer. Convenient cord wrap for easy storage. High-flow regulator for increased performance.
Designed with the power and speed to handle all finish and trim applications. The compact, lightweight and balanced design allows for easy portability. The oil free pump allows for maintenance free operation and no oil leaks. Draws only 12 amps; will not trip circuit breakers. Integrated control panel for easy access to couplers and pressure control knob; highly visible gauges. Pancake tank design keeps compressor compact and well balanced. Weighs only 38 lbs. Dual couplers allows you to run 2 hoses simultaneously. 150 max psi.
Cold weather start up valve. Designed with the power and speed to handle all finish & trim applications; comes with an oil less pump which ensures no messy oil leaks. Specs: Height: 13.5" Length: 16"; Weight: 38 lb; Recovery Time: 95 ? 135 psi 17 seconds; Pump Up Time: 0 ? 135 psi 82 seconds; Horsepower: (1.0 HP running); Powersource: Electric; Max Pressure: 135 psi; Tank Storage: 2.5 gal.; Max Amp at 115V: 8 amps.
Twin-tank, oil-lubricated 5 gallon unit. Powerful 3.5 HP electric motor, flutter-valve pump puts out 115 max psi and cfm's of 5.2 at 40 psi and 4.2 at 90 psi. Functional enough for use as an inflator, yet vibrant enough for use with the majority of air tools. Compact and portable with easy to read pressure gauges.
165 max psi tank (22.7L) and 2.6 scfm delivered at 90 psi pump, enable long tool run time with quick recovery. High efficiency motor for easy start up in cold weather or extension cord application. (14 gauge or larger, 50 ft (15.2m) or less). 75.5 dBA noise level for a quiet work environment. High flow regulator and couplers to maximize air tool performance. Long life oil free pump for maintenance free operation. Console cover protects controls and is removable to allow easy repair. Outlet tube re-routed to avoid being catch point. 30 lb weight makes unit easy to carry/store. 2 universal couplers to easily support two users. Ball drain valve for quick and thorough tank draining. Convenient cord wrap for easy storage. Protective rubber leg covers to prevent marring. High flow regulator for increased performance. 120 v, 60 Hz, 10 amps, universal motor.
Generates 4.4 SCFM which provides enough power for all types of applications, from finish to framing. The oil splash design and induction motor provides the durability expected for professional contractors. Direct drive motor, Cast iron sleeve/cast iron head cylinder, oil-splash lubrication. Specs: 2.0 HP Running, 4.4 SCFM at 90 PSI, 125 max PSI, 4.3 gallon tank. 14.5"H x 20.5"L. 60 lbs. tool weight. Includes: 1/4" coupler.
1.0 CFM at 90 psi. 125 max psi. 0.75 (Peak) horsepower. 44 dB @25 ft. 1 gallon air tank capacity. Dimensions: 14.1"L x 13.77"W x 12.6"H. Weighs 24.7 lbs.
120V/60HZ/3.5 Peak HP. 5.2 CFM/40 psi; 4.2 CFM/90 psi. Max pressure 115 psi.
Vertically stacked twin tanks, 2 gallon capacity each for running multiple nailers (4.0cfm at 90psi). Direct drive electric motor provides durability and long life. All metal inner construction and fan. Line regulator with gauge; oil lubricated pump and O-ring on drain cock makes valve easy to open and close. Specs: Power Output: 2hp; Amps: 14.5; Rpm: 3,450; Air Displacement: 4.0cfm at 90psi; Start/Stop Control: 100/125psi; Tank Capacity: 4.0 gal. Weight: 60lbs; Lubrication: Oil; Recovery Time: 14-sec. Includes: Synthetic Oil (8oz) & Oil Dipstick.
3.2 CFM delivered at 100 psi pump enables quick recovery. Oil lubricated pump improves durability. Cast iron cylinder enhances pump life. Lightweight at only 53.32 lbs. design for easy use and handling in a variety of orientations. High-flow regulator for increased performance. Dual soft start valves assist in cold weather start-up. 4 gallon twin stack tank design. Direct drive. 120v Ac 14 amps, 60 Hz, 2 pole induction motor. Pump speed 3,400 rpm.
3.0 scfm delivered at 90 psi pump. 2.5 gallon tank and 200 max psi enables a large amount of nails to be fired and provides quick recovery. Durable oil free pump provides extended maintenance-free operation. Low 71.5" dBA allows for quieter operation (tested per ISO3744). Low 12 amp draw motor provides easy start-up and reduces breaker tripping. Lightweight (36 lbs.), thin (12.5") and compact design is easy to carry and store. Compressor can be operated/stored in either the vertical or horizontal position. Roll cage and control panel provide protection to key compressor components. Dual quick couplers to easily support 2 nailers. Ball valve drain allows for quick and thorough tank draining. Convenient cord wrap for easy storage. High-flow regulator for increased performance. Drive belt. 120 volt, 60 Hz, 8 amps, universal motor. 2,300 rpm pump speed.
The FlexVolt 60 volt max 2.5 gallon cordless air compressor offers all of the convenience and portability of cordless with the power of a corded tool. Each battery charge allows for up to 1,220 nails, providing the run-time to complete a variety of applications. OneTurn regulator for fast, accurate pressure adjustments. Heavy duty roll cage for jobsite applications. Brushless motor paired with a heavy duty oil-free pump. 135 max psi tank storage. Lightweight and portable at only 21.5 lbs. and a height of 15.5". Made in the USA.
Compact design was engineered to be more maneuverable and convenient to carry. It offers enough air flow to operate two framing nailers or three roofing nailers simultaneously. Four oversized rubber feet to help minimize vibration. Durable ball type drain valve. Roll bar handle protects the oil site glass and other gauges against damage if the unit accidentally tips or rolls over. Upgraded industrial-grade pressure switch/regulator makes for easy adjustments and increased durability. Oil-lubricated pump offers a cast iron cylinder for durable performance over extended periods of use. Specs: 3 horsepower (peak) induction motor, this unit draws only 13.8 amps (120 volts) to prevent circuit breakers from flipping as the motor cuts in and out. Four-gallon stack tank compressor providing 4 CFM at 90 psi and a maximum operating pressure of 135 psi.
Single stage compressor for professionals and serious do-it-yourselfers it is ideal for the home, shop or jobsite. Specs: HP: 2; CFM at 90 PSI:4.30; Max. PSIG: 135; Dimensions LxHxW: 19x19x19; Net Weight: 77lbs; Start Up Kit: No.
120 V/60HZ/5 Peak Hp. 6.4 CFM/40 psi; 5.6 CFM/90 psi. Max pressure 125.
2.5 CFM at 90 psi. 1.5 (Peak) horsepower. 125 psi max. 47 dB @25 ft. 4 gallon air tank capacity. Dimensions: 16.93"L x 16.54"W x 16.54"H. Weighs 68.5 lbs.
5.2 CFM at 40 PSI or 4.2 CFM at 90 PSI. Max pressure: 115 PSI. Oil lubricated. Features easy to read dual pressure gauges, wheel kit and quick connect coupler. Accessories Kit includes: 1/2" impact wrench, tire inflator with gauge, spray gun, 2" brand nailer/stapler and 25' hose.
200 PSI max tank storage pressure provides a user with 80 percent more usable air. 5.0 SCFM at 90 PSI allows the compressor to recover quickly after its initial tank charge is exhausted. Vertical stand feature and collapsible handle allows a user to save space by transporting or storing the compressor in a vertical position. 78 dBA operation noise level for a quieter work environment. 10" non-flat foam tires allow for easy transportation around the jobsite. EHP efficient high pressure technology allows for longer pump and motor life. Oil free, maintenance free pump for convenient use. Efficient high pressure motor allows the compressor to be run with an extension cord (12 ga. or heavier, 50 ft. or less) due to consistent amp draw requirement of the compressor. High flow coupler allows for maximum nailer performance. Metal console panel provides a display area as well as protects the gauges, couplers and regulator. High flow coupler allows for maximum nailer performance. 2" gauges allow for an easy to read surface. Weighs 83 lbs.
5.0 SCFM at 90 psi allows for quick compressor recovery times. 200 psi max tank storage pressure allows for longer air tool run times. 78 dBA (tested per ISO3744) operational noise level for a quieter work environment. EHP efficient high pressure technology delivers exceptional air-tool run times. Oil free, maintenance free pump for convenient use. Efficient high pressure motor allows the compressor to be run with an extension cord (12 ga. or heavier, 50 ft or less) due to consistent amp draw requirements of the compressor. Compact design allows for the compressor to be easily moved, transported and stored. Robust dual purpose handle provides additional protection to the compressor along with serving as a hose wrap. Metal console panel protects the gauge, coupler and regulator. High flow air regulator and high flow coupler allows for maximum air tool run time. 2 inch gauges allow for an easy to read surface. Wide track, semi-pneumatic tires allow for additional stability, easy movement and no tire maintenance. 1,750 rpm pump speed. 120 volts power supply.
5.0 CFM at 90 psi. 125 max psi. 2.0 (Peak) horsepower. 49 dB @25 ft. 5 gallon air tank capacity. Dimensions: 28.35"L x 20.08"W x 20.08"H. Weighs 86.3 lbs.
Back to top