Check Out Our Website!
Want it today?Call our Traverse City or Suttons Bay locations to confirm on-hand inventory!
Want it today? Call to confirm on-hand inventory! In Traverse City: 231-947-1400 and Suttons Bay: 231-271-0010
For grinding or buffing. Right hand thread only.
Universal dust bag fits all Dewalt miter saws.
Provides a consistent and optimum pressure. Made from a durable plastic composite body. Comes with wedge-lock hardware which works in t-slots or miter slots on tablesaws, router tables, band saws and more.
Time-saving and accurate saw fence micro-adjuster. Allows you to dial-in precise adjustments easily with one hand to your Kreg Precision router table or Precision band saw down to .005". Easy to grip ribbed dial. Black plastic fixing knob. Dimensions: 7" x 2" x 5".
Used to accurately position crown molding vertically against saw fence at exactly the same angle for every cut. Includes: (2) stops, one for each side of blade.
Use to hold trim at the angle required, eliminating the need for advanced compound miter cuts and difficult 'coping'. Curved design compensate for a wide variety of crown molding spring angles, and its extension arms let you work with crown up to 5-1/2" wide with a 12" saw and 3-1/2" wide with a 10" saw.
Leg stand for the RK7136.2 (711.6411) miter saw. 4 easily attached legs allow users to accurately and safely use the miter saw away from the work bench. Legs slide into pockets in the miter saw base and secure with large thumb screws. Leg stand includes rolling material supports that attach to a 2" x 4" (Not Included). The rolling material supports also include material stops for repetitive cuts.
Add safety and convenience to your Precision Router Table with this incredibly handy power switch. Features a 2 plug design which allows it to control two independent devices at once. Key-Lok which eliminates accidental power-on, and a long 8' heavy-duty 14 gauge power cord. 15amp, 120v.
Add true mobility to your Universal Steel stand. Includes (4) heavy-duty casters. Dual-locking mechanism protects against caster roll and pivot. Includes all necessary hardware.
Lightweight and durable steel stand has adjustable height and folds for transport. For use with No.D24000 (770.2525).
Folds for easy storage. Portable, lightweight and durable. Fits No.DW745 (SKU 281.2428) jobsite table saw.
Table saw stand for Worm Drive table saw. The portable jobsite Worm drive table saw stand is made exclusively for (8889081) . Set-up for the job is quick and easy with tool-less latches to secure the table saw. Designed for portability, weighing only 14 lbs.
Heavy-duty all steel construction, stand supports up to 400 lbs. Universal design accommodates all brands of miter saws, including 12" sliding miter saws. Quick-release mounting brackets for easy miter saw mounting and removal. Tool-free adjustment of material supports and extension arms. Material supports include rollers and positive stops for repetitive cuts. Weighs 41.8 lbs.
Portable tile saw stand for No.MK370 EXP model tile saw; weighs 3.1 lbs.
This adjustable and durable table is built to last. Comes equipped with levelers to compensate for uneven floors. The stand has predrilled holes that make it easy to mount accessories and to customize the stand. Versatile, system-ready design for all Kreg table top solutions, including the Klamp Table and the Precision Router Table Top. You can also use it to create a custom tool or work stand for your shop. Made from heavy 12 and 16 gauge steel and can be adjusted from 31" to 39: (78.7 cm to 99.1 cm) in height. Includes (4) leveling feet and assembly hardware. Combine with the Router Table Top (5100797) and the Router Table Fence (5823109) to assemble into the PRS1045 Router Table.
High performance router table with insert plate. This rugged MDF table top provides a solid, secure routing solution for any workshop. A 1" thick (25mm) MDF core provides a flat, solid top that absorbs vibrations, while steel reinforcing struts prevent sagging; even under the weight of heavy routers and lifts. Durable, high pressure laminate skin offers a low-friction Easy-Slide surface, making it easy to slide work pieces across the surface. Thick edge banding protects the top against bumps and abrasions. Pre-drilled top with holes for Precision Insert-Plate Levelers. Includes (1) Industrial duty Router Table Top, (1) Insert Plate with 3 Level-Lock rings, ring wrench and starting pin, (4) Precision Insert Plate Levelers, (1) Miter Gauge/T-Slot Track, (2) Steel reinforcing struts, and (1) Hardware set and owner's manual. Combine with the Router Table Base (5100789) and the Router Table Fence (5823109) to assemble into the PRS1045 Router Table.
Rolling table saw stand weighs only 33lbs. Heavy-duty kick stand allows the stand to balance upright for mobility and storage. Wide stand base and offset rear legs provide stability and support for material feed control. Heavy-duty aluminum construction withstands loads up to 200 lbs. Rubber feet keep the stand from sliding on smooth surfaces. Table top height provides the user ideal table top positioning for a wide variety of table saw applications.
This anodized-aluminum fence features a table saw-style T-square adjustment system that ensures the fence will always stay parallel to the miter gauge slot. The fence adjusts easily with just one hand and locks firmly in place with dual locks. A large paddle lock on the in-feed end and a quarter-turn lock on the outfeed end that prevents fence deflection. Combine with the Router Table Top (5100797) and the Router Table Base (5100789) to assemble into the PRS1045 Router Table.
Universal design works with all brands of miter saws. Lightweight aluminum construction, 5-1/2 ft. beam extends to support up to 16 ft. of material and up to 400 lbs. Legs provide support and fold for easy storage. Work stops/supports can be repositioned quickly anywhere along the rail. Non-marring feet, Miter Saw Not Included. Includes: (1) heavy duty miter sawstand, (2) convertible work supports/stops and (2) mounting brackets.
Features a full size router table in a compact, portable package. Durable and versatile. Equipped with all new Level-Loc reducing rings that twist into place and lock in level and flush with the plate surface. The plate comes with three rings: 1", 12/16" (for use with Porter-Cable style guide bushings) and 25/8". Markings make it easy to center and mount any router. Heavy-duty aluminum fence with new clamps that allow quick, confident fence adjustment. Just flip the cams up, move the fence, and then flip the cams back down to lock the fence in place.
Wide adjustable infeed and outfeed roller work supports provide up to 8' of material support. Adjustable mounting rails adapt to nearly any miter saw or portable thickness planer. Wide rubber grip wheels provide jobsite mobility. 3-position pneumatic assisted raising and lowering for the ultimate in flexibility and ease of set up. Durable tubular steel constriction allows for a 300 lb max weight capacity. Compact vertical storage. Weighs 67 lbs. Miter Saw Not Included.
Back to top