Check Out Our Website!
Want it today?Call our Traverse City or Suttons Bay locations to confirm on-hand inventory!
Want it today? Call to confirm on-hand inventory! In Traverse City: 231-947-1400 and Suttons Bay: 231-271-0010
The 13 amp 7-1/4" circular saw with laser cut line guide has the power you need to tackle tough jobs. The laser cut line guide provides you with added confidence to make clean and accurate cuts. This circular saw is also equipped with a convenient spindle lock, allowing for easy blade changes. Easy bevel adjustment allows for accurate 0-45 degree angled cuts. Depth adjust to 2.5" at 90 degrees. Lightweight design for enhanced control. 0-5,300 rpm. Includes Circular saw blade and wrench.
Powerful 13 amp motor. Spindle lock for easy blade changes. Comfort rubber insert in "D" handle. Externally replaceable brushes. Specs: 5,500 RPM no-load speed, Cutting Depth: 90 degrees - 2-7/16" and 45 degrees - 1-13/16", 832 lbs. weight. Includes: 24T Carbide-tipped Blade, Rip Guide, and Blade Wrench.
Upgraded 14 amp motor for longer saw life. Spindle lock makes blade changes a breeze. 51? Bevel with Positive Stop at 45? for added cutting capacity. 2 point line of sight cuts straight lines with ease. Improved dust blower keeps line of cut free of sawdust. Power-On indicator for powered tool alert. Lighter weight design for less user fatigue. On-tool wrench storage for quick and easy blade changes. Safety Lock/Guarded trigger minimizes accidental starts. Anti-Snag Lower Guard reduces snags when making narrow cut-offs. Rear Lever Depth Adjustment quickly assures desired cut depth. Includes: (1) 5180 Circular Saw, (1) 20-tooth Carbide Blade and (1) Blade Wrench.
7-1/4" Circular saw with 12 amp motor and 5,500 rpm. 2-1/2" cut capacity at 90?; 1-49/64" at 45?. Spindle lock for easy blade change. 10' cord to allow most uses without an extension cord. Lightweight at only 8.8 lbs. Includes 7-1/4" carbide tipped blade, arbor wrench and rip fence.
15 amp motor running at 5,500 rpm provides power and speed through applications. Steel shoe, along with metal upper and lower guards that provide added durability. It offers spindle lock and depth adjustment and a 45 degree max bevel adjust to provide ease of use. An Aux handle provides comfort and clear line of sight. At only 9.5 lbs this unit is convenient to use. Includes Circular Saw, 7-1/4" 18 tooth carbide tipped blade and Allen wrench.
Upgraded 15 amp motor for longer saw life. Single beam laser for accurate cuts. Spindle lock makes blade changes a breeze. 51? Bevel with Positive Stop at 45? for added cutting capacity. Improved dust blower keeps line of cut free of sawdust. Power-On indicator for powered tool alert. Carry bag for convenient portability and storage. On-tool wrench storage for quick and easy blade changes. Safety Lock/Guarded trigger minimizes accidental starts. Anti-Snag Lower Guard reduces snags when making narrow cut-offs. Rear View Depth Adjustment for clear visibility and quick cut-depth changes. Ball Bearing Motor Construction for twice the life compared to the previous model. Includes: (1) 5280 Circular Saw, (1) 24-tooth Carbide Blade, (1) Blade Wrench and a carrying bag.
Heavy gauge aluminum wraparound base ensures stable support, ruler markings on base for precise cutting, only 84dB for quiet operation. Specs: 5/8" arbor, 7-1/4" blade diameter, max cutting capacity: 90 degrees-2-1/2", 45 degrees-1-5/8", no load RPM-5,200, 11-3/4" long, weighs 8.0lbs. Includes: 7-1/4" 24T Framing Blade - General Contractor and Hex wrench.
4-1/2" Compact Circular saw. 3,500 rpm, 5 amp motor, 1-11/16" max cutting depth at 90 degrees; 1-1/8" cutting depth at 45 degrees. Weighs only 5 lbs. Left handed blade design for great cut-line visibility. Includes (1) 24 teeth TCT saw blade, rip fence, vacuum adapter and a hex key for changing blades. Ergonomically designed for accurate one handed cutting. Allows the user to hold the material for secure cutting. Durable steel shoe resists scratching when cutting tile and masonry.
Cuts a variety of materials including tile. Plunge cut depth settings for accurate, precision cutting. Includes (3) 3-3/8" blades: carbide blade for wood; diamond blade for tile; HSS for metal and rip fence and plastic shoe guard to prevent scratches on fine wood. 1-1/16" max depth of cut. Laser cutting guide. 3,500 rpm provides high torque and quick cutting. 10' rubber cord. Weight 3.3 lbs.
Lightweight, easy to maneuver and transport, bevel capacity from 0-55 degrees. Heavy-duty die cast aluminum alloy, one piece base, offers easy to read front and side scales, cutting depth lever, non-slip elastomer grip handle, carbon brush access. Specs: 5/8" arbor, no load speed 6,000RPM, spindle lock, bevel capacity 55 degrees, depth of cut at: 90 degrees-2-7/16", 45 degrees-1-7/8", 7-1/4" blade diameter, weighs 9.5lbs. Includes: 24 tooth carbide tipped blade, blade wrench, carrying case.
Powerful 15 amp motor delivers 5,800 rpm for proven performance and jobsite durability. Lower guard design improves performance when making bevel and narrow cuts. Large cutting capacity (2-3/8" at 90 degrees, 1/-3/4" at 45 degrees). Two built-in L.E.D. Heavy gauge aluminum wrap-around base for improved durability. Two lights illuminate the line of cut for increased accuracy. Well balanced design for superior handling and performance. AC/DC switch allows for use with alternative power sources. Bevel cuts 0-45 degrees for the most common angles. Large easy to read markings on depth and bevel scales. Flat motor housing design increases stability when changing blades. Conveniently located shaft lock for easy blade replacement. All ball bearing construction for longer life. Ideal for framers, builders, masons and siding contractors.
Lubricating system cuts through soft metals like aluminum, copper and stainless steel without overheating or warping. Less splintering and breaking. Tungsten carbide tips. Kerf .131". Arbor: 5/8".
Anti-snag ball bearing lower guard provides smooth guard operation and long life in harsh environments. Toughcord provides longer durability against cord pull outs. Includes carbide tipped blade, blade wrench and instruction user manual. Specs: 1950 W max watts outage, 5200 rpm no load speed, 57-degree bevel capacity, 22.5 and 45-degree bevel stops, 2-9/16" depth of cut and weighs 8.8 lbs.
Unmatched durability and flatness, 56 degree level, powerful blower to clear dust in line of cut, High strength and lightweight magnesium upper guard, anti-snag lower guard, adjustable bevel and depth levers, on-tool wrench storage, removable end cap,easy, serviceable brushes, textured soft grip, heavy duty 22 amp switch, spindle lock. Specs: 120V, 5/8" arbor, bevel-56 degrees, bevel stops-22.5/45 degrees, 7-1/4" blade diameter, depth of cut at: 90 degrees-2-7/16", 45 degrees-1-7/8", 50 degrees 1-5/8", no load RPM-5,600, 10ft cord, weighs 10.2lbs. Includes: 24 tooth carbide blade, carrying bag.
Powerful 15 amp motor for a high power-to-weight ratio. Large ball bearings and gears for longer tool life. Lower guard design improves performance when making bevel and narrow cuts. Large cutting capacity 2-1/2" at 90 degrees, 1-3/4" at 45 degrees and 1-3/8" at 56 degrees. Large and easy to read marking on depth and bevel scales. Heavy gauge aluminum wrap-around base for more accurate cuts. Large ball bearings and gears for longer tool life. Built-in dust blower clears the line of cut for greater accuracy. Ergonomic rubberized grip provides added comfort. Includes: 7-1/4" Carbide tipped blade, blade wrench and tool case.
Tilt-Lok main handle adjusts to the work or most comfortable work position, cuts tough materials, clear sight line with superior blade visibility from either side, 3.25 maximum horsepower, blade can bevel to 50 degrees, helical steel gears and a 22 amp switch. Specs: 7-1/4" blade diameter, 5/8" arbor, blade side is right, 5/8" spindle, metal/wood cutting- wood, spindle lock, adjustable soft grip handle, blade position is right, depth of cut at: 90 degrees-2-7/16", 45 degrees-1-13/16", 50 degrees 1-11/16", 9 ft. fixed cord, double insulated, 13-3/4" long, weighs 10.4lbs. Includes: circular saw blade, hex blade wrench and a carrying case.
Efficient hypoid gears deliver more power and greater surface contact than conventional worm drive gears, oil bath technology and sealed gear housing for less maintenance, ergonomic rubberized grip, 0-51.5 degree bevel capacity with positive stops at 45 and 51.5 degree, ideal for truss and rafter cut-outs, lower guard design, blade wrench is attached to the saw, externally accessible brushes. Specs: 7-1/4" blade diameter, 5/8" arbor, max cutting capacity: 90 degrees-2-3/8", 45 degrees-1-3/4", 50 degrees 1-9/16", no load RPM-4,500, weighs 14.3lbs. Includes: carbide tipped blade, blade wrench.
The Tilt-Lok? handle on Milwaukee's circular has a cushioned handle with 8 positions to adjust to any cutting application maximizing comfort and control. The blade can bevel to 50 degrees and offers a superior visibility and a clear sight line from either side. Helical steel gears and a 22 amp switch are just two of the features that ensure the Milwaukee's reputation for durability. Weighing in at 10.4 lbs and delivering 3.25 maximum horsepower, this tool offers the best power to weight ratio. Includes (1) blade wrench and (1) circular saw blade.
Lightweight circular saw with electric brake weighs only 8.8 lbs. Electric brake stops the blade after trigger is released. 15 amp motor delivers power for the toughest applications. 57 degree beveling capacity with stops at 45 degree and 22.5 degrees. Depth of cut capacity of 2-9/16". Ball bearing lower guard provides long life in harsh environments. Durable high grade aluminum smooth base for accurate cuts. Lower guard design improves performance when making bevel cuts and cutting shims. An integrated dust blower allows the user to clear its line of sight while cutting. Tough cord protection system provides durability against cord pull-out. On-board blade wrench storage allows for easy storage and convenience for blade changes.
Powerful 15.0 amp motor delivers 5,800 rpm for proven performance and jobsite durability. Magnesium components create a lightweight saw (10.6 lbs) that is well balanced and jobsite tough. Make quick, one-handed adjustments using large, rubberized levers. Better fit and more control with comfortable rubber grip handle. Settings are easy to read with oversized number and ruler markings. Large cutting capacity (2-1/2" at 90 degrees) and bevel capacity (0-56 degrees) with positive stops at 22.5 and 45 degrees. Two built-in L.E.D. lights illuminate the line of cut for increased accuracy. Built-in dust blower clears the line of cut for greater accuracy. Blade wrench is attached to saw for fast and convenient blade changing. Reinforced power cord withstands jobsite abuse and lower repair costs. Includes a premium 7-1/4" carbide tipped framing blade that cuts faster and lasts longer.
Die-cast aluminum motor and gear housings for durability. Push button blade lock for easy blade changes and anti-snag lower guard reduces snags. Two position saw hook for safe rafter placement. Oil indicator level and relief bellows. 8' cord length. UL, CSA Certifications. STANDARD EQUIPMENT: 7-1/4", 24T Carbide blade, blade wrench, saw hook. SPECIFICATIONS: 120V, 15 amp, 7-1/4" blade diameter, diamond arbor, 4,400 no load RPM. Depth of cut at 45 degrees: 1-15/16", Depth of cut at 90 degrees: 2-3/8".
The Milwaukee 7-1/4-in. Worm Driver circular saw provides the power contractors demand with innovative features designed to make their job easier. The 15.0 amp, 4,400 rpm motor delivers maximum cutting performance and does not bog down, even under heavy loads. Hardened steel worm gearing provides maximum torque in the toughest applications. Magnesium construction makes the saw both durable and lightweight. The composite shoe will no warp, bend or kick up a burr. The exclusive oil site glass makes it simple to quickly and accurately check the current oil level of the saw. Also included with the saw is a carbide tipped blade.
15 amp motor provides power for a variety of cutting applications. Features an enormous rearing ration in a compact size. Lightweight magnesium motor housing and foot plate construction reduces user fatigue for less down time. Built-in saw hook allows convenient saw storage between cuts. Feather board multi-function wrench for blade and brush change, lever adjustments and blade diamond center knockout. Accurate depth of cut system allows for quick accurate adjustment. Left side blade design for clarity of cut line. Anti-snag lower guard provides smooth operation for small cut-off pieces. Soft-grip handles for comfort and control. 53? bevel capacity with positive detent stop at 45?. Large adjustment levers for fast, accurate bevel and depth adjustments. Easy access spindle lock for easy blade changes. Includes: (1) 7-1/4" Magnesium Worm Drive, (1) Multi-function blade wrench, (1) carbide blade and (1) built-in saw hook.
Light magnesium housing, impact resistant carbide blade for optimal use, anti snag lower guard, 20 amp switch and heavy gauge cord, die cast aluminum motor and gear housings, push button spindle lock, oil indicator level and relief bellows, aluminum Foot for less user fatigue, two position saw hook, twist lock plug. Specs: 120V, 7 1/4" blade diameter, diamond arbor, UL, CSA certifications, 8 ft. cord, depth of cut at: 90 degrees-2-3/8", 45 degrees-1-15/16", no load 4,400RPM, weighs 14.0lbs. Includes: 24-tooth carbide blade, blade wrench.
Die-cast aluminum motor and gear housings. Precision-machined worm drive gears for max. power and durability. Oil indicator level and relief bellows. 22-amp switch and heavy-gauge cord. STANDARD EQUIPMENT: 8-1/4" worm drive skilsaw, blade wrench, 40T combination blade. SPECIFICATIONS: 13 Amp, 120 Volt, 8-1/4" blade diameter, 4,300 No Load RPM, 1-1/2" depth of cut at 60 degrees, 2-1/4" depth of cut at 45 degrees, 2-7/8" depth of cut at 90 degrees. 8' length cord. 18.8 lbs. weight.
Lighter magnesium construction, reduces user fatigue for less down time. Cut-Ready depth of cut system helps with quick, accurate depth measurements. 53 degree bevel allows users to complete a wider variety of cuts. A multi-function wrench has a variety of uses for convenience on the job site. 15 amps of power gives users the power to rip through more lumber in less time. Impact resistant carbide blade can withstand challenging cuts. Saw hook provides safe rafter placement. The anti-snag lower guard provides smooth operation for small cut-off pieces. A durable magnesium foot is designed to endure jobsite abuse. Oil lubricated worm drive gears provide ultimate durability and long saw life in addition to quiet running. Soft grip handle for comfort and control. More accessible spindle lock for quick and easy blade changes. 120 volts. 8' cord. Actual weight is 11.5 lbs without blade, cord and wrench.
Worm drive gearing optimized for metal. Blade window gives you the ability to make true and accurate cuts. Comes with a large chip tray so you can stay productive. The Diablo Cermet blade cuts quickly and virtually spark-free, with minimal burrs; showing metal no mercy. Weighs 15.4 lbs.
Faster, cleaner, more affordable metal cutting, durable blade shield with integral chip tank deflects/collects hot chips and sparks, plunge lever for fast, effective plunge cut, exclusive quick release shield latch for fast waste disposal and blade changes, premium cermet tipped blades cut faster, cleaner, and longer than other carbide tipped or friction blades. Specs: Voltage 120 AC; 8" blade, no load speed- 3,700 RPM, spindle-5/8",15 ft. fixed cord, grounded, metal/wood cutting-metal, spindle lock, soft grip handle, blade position-right, depth of cut at: 90 degrees 2-9/16", 6-1/2" long, weighs 13.3 lbs. Includes: hex blade wrench, circular saw blade, carrying case.
Larger for cutting 4x cleanly and efficiently in 1 pass. 15 amp dual-field motor designed for more power and durability. Magnesium construction. Keyed blade change. Includes 10-1/4" Diablo blade so you're ready to make perfect cuts right out of the box. Includes blade wrench stored on tool.
Back to top