Check Out Our Website!
Want it today?Call our Traverse City or Suttons Bay locations to confirm on-hand inventory!
Want it today? Call to confirm on-hand inventory! In Traverse City: 231-947-1400 and Suttons Bay: 231-271-0010
Compact front to back length. Multi-grip trigger provides comfort and convenience, allowing the user to get into tighter spaces while still having access to the trigger. Specs: 360UWO, 2 speed settings, 0-650/0-2,000, plastic ratcheting chuck and weighs 3 lbs. Includes tool only with belt hook and 2" Phillips tip bit.
Built in electronics include variable speed control, an electronic clutch, 11 settings plus drill mode, fuel gauge,and overload protection, single sleeve ratcheting chuck, extended paddle switch, LED's illuminates work surface. Specs: 12V. no load speed is 800RPM, 100 in/lbs torque, head length is 3-3/4", single sleeve, ratcheting, Lituium-Ion battery, 11.75" long, weighs 2.43lbs. Includes: (1) M12 Red Lithium battery, (1) 30-minute charger, (1) carrying case.
Compact for easy access in tight places with variable speed reversing, paddle switch, shielded chuck, 100 percent ball bearing construction, double gear reduction increases torque performance, decreases gear stress, pistol grip handle. Specs: no load speed 0-1,200RPM, max watts out 200W, capacity in: wood (spade bit)-1-1/8", wood (hole saw)-1-1/8", steel (twist bit)-3/8", (hole saw)-3/4", gear reduction double , anti-slip grip, anti-lock control, spindle lock , weighs 3.75lbs. Includes: chuck key with holder.
Delivers cordless drilling power into tough-to-reach spaces. Packs plenty of torque for a wide range of drilling and driving tasks, yet it weighs only 4.0 lbs. with a slim design and over 1' of tool extension. It?s ideal for assembly, garage door installation, steel framing, woodworking, electrical, and any other job that requires a more compact drilling solution in close-quarters applications. Built-in LED light with afterglow illuminates the work area. Specs: Variable speed is 0-1,800 RPM, 3/8" keyless chuck, 121 in.lbs. max torque, 12-3/8" long. Battery and charger not included.
Dual speed ranges for increased user flexibility providing a wide range of applications. Compact front to back length allowing users to fit into hard to reach spaces. Multi-grip trigger provides comfort and convenience. Spec: 360 UWO, 2 speed settings, 0-650/0-2000 rpm, 3/8" plastic ratcheting chuck. Includes 20V max 1.5 Ah compact li-ion battery, 30 minute fast charger, belt hook, 2" phillips tip bit and kit box.
Compact, easy use between framing studs or any other close quarter application with variable speed for controlled drilling in wood/metal and speedy fastening, built in shock proof, high output, white LED light illuminates drilling area with a bulb that never needs replacing throughout the life of the tool, paddle switch with speed limiting dial, reduced head height, ball bearing construction. Specs: capacity in: wood-13/16", steel-3/8", no load RPM is 0-2,400, 10-5/8" long, weighs 3.1lbs. Includes: grip complete, chuck key, key holder.
D-handle right angle drill kit with a powerful 7 amp motor. Delivers trigger speed control in two ranges: 0-335/0-750 rpm plus reverse. Torque offers 1/2" capacity in steel. Heavy duty 1/2" keyed chuck with holder provides an industrial hold during drilling and fastening. Versatile: handles up to a 4-5/8" Self feed bit. Quik-Lok 8 ft 3-wire grounded rubber cord provides easy storage and field replacement. Weighs 10.3 lbs. 120V AC. No load rpm 0-500. This kit includes: (1) 1/2" D-Handle right angle drill, (1) 3/16" socket wrench, (1) 9/16" open end wrench, (1) RAD assembly and (1) side handle.
Powerful, yet compact for large hole drilling between joists and studs, two speed ranges increase the versatility of this drill, hi-torque and hi-speed for the heavy duty user with an extra long pipe handle that helps you control the power. Specs: 120AC, no load RPM is 300/1,200, capacity in: wood-(auger bit)-1-1/2", (self-feed bit)-4-5/8", metal (twist bit)-1/2", spindles 5/8"-16, triple gear train, 8 ft. fixed cord, grounded, weighs 11.5lbs. Includes: pipe handle.
Two operating speeds with a clutch in the low gear range, speed shifting is easy, easy turn gear shift knob, comfort grip handle features 3 positions with 90 degree left-right rotation for maximum operator comfort for all applications. Specs: 120A, no load RPM is 450/1,750, low speed clutch, capacity in: wood (self-feed bit)-4-5/8", (hole saw)-6", metal (twist bit)-1/2", spindle 5/8 in.-16, triple gear train, 8 ft. fixed cord, grounded, 22" long, weighs 14.7lbs. Includes: side handle.
Includes: drill with Quik-Lok, M18 Redlithium SX 4.0 extended capacity battery pack, M18 & M12 multi-voltage charger, contractor's bag. Powerstate brushless moter provides constant power under heavy load, 17"L, 8.5Lbs., 0-1,200 RPM. Capacity in wood: auger bits up to 1-1/4" and self-feed bits up to 2".
Back to top