Sort By:
PIPE SAFETY CAPS 4PIEC 1.5X3X3 Playstar PS 1193 Safety Pipe Cap, Plastic

Fits 1 5/8" outside diameter pipe. Packaged in set of 4.

Our Price: $3.27
DOCK CONNECTOR CLIPS STAN GALV Playstar PS 1414 Standard Dock Connector Clip, Galvanized

Use to connect roll in and stationary dock sections.

Our Price: $5.82
CLEAT DOCK RESIN 1.5 X 1 X8 IN PlayStar PS 1191 Resin Dock Cleat, For Use With All Docks, Plastic

8" cleat with large tie off area. Mounts with two screws (Not Included).

Our Price: $6.13
MOORING RING 3 IN HVY DTY GALV Playstar PS 1195 Commercial Grade Heavy Duty Mooring Ring, 3 in, Steel, Galvanized

3" heavy duty ring. Hot dipped galvanized for long life.

Our Price: $10.78
Playstar PS 1145 Dock Float Hardware Playstar PS 1145 Dock Float Hardware, Metal, Galvanized

Hot-dipped galvanized for long life. Includes enough screws and washers to attach 3 PlayStar marine dock floats to frames. Contains twelve 3/8" x 2" lag screws and twelve 3/8" flat washers.

Our Price: $10.82
Playstar PS 1135 Dock Frame Hardware Playstar PS 1135 Dock Frame Hardware, Metal, Galvanized

Hot-dipped galvanized for long life. Includes fasteners for use with PlayStar's Framing Kits, Hinge Kits, and Pipe Sleeves. Contains twelve 3/8"-16 x 3" carriage bolts, twelve 3/8" flat washers, twelve 3/8" lock washers, and twelve 3/8" nuts.

Our Price: $11.24
DOCK CONNCTR CLIP 5 X 7.25 X 5 Playstar PS 1021 Commercial Grade Heavy Duty Connector Clip, Metal, Hot Dipped Galvanized

Securely attaches stationary and roll in docks. Hot dipped galvanized for long life.

Our Price: $12.84
Playstar PS 1011 Inside Corner Bracket Playstar PS 1011 Heavy Duty Inside Corner Bracket 6-1/4 in L x 6-1/4 in W x 5 in H, Metal, Galvanized

Hot dipped galvanized for long life.  Prevents twisting and bending.

Our Price: $14.44
BUMPER TORPEDO FOAT 5.7X5.7X17 Playstar PS 1187 Torpedo Bumper, For Use With Boats

Inflatable. For use on boats. Protects all sizes of boats.

Our Price: $17.07
FLOATING DOCK AUGER STANDARD  PlayStar Commercial Grade Dock Auger, Cast Iron, Stainless Steel Nut and Bolt, Galvanized

Easily, and securely, anchors dock pipe to bottom. One piece, heavy-duty cast iron construction securely fastens to pipe with single stainless steel nut and bolt. Hot dipped galvanized for long life. Use with No.PS1080 Commercial Grade pipe sleeve. For use with 1-5/8" O.D. and 1-7/8" O.D. dock pipe.

Our Price: $19.46
Playstar PS 1013 Outside Corner Bracket 5 in L x 8 in W x 8 in H Playstar PS 1013 Heavy Duty Outside Corner Bracket 5 in L x 8 in W x 8 in H, Metal, Galvanized

Hot dipped galvanized for long life.  Securely ties frame together.

Our Price: $20.27
DOCK BUMPER MULT PUR 2.5X15.76 Playstar PS 1352 Multi-Purpose Dock Bumper

Easily installs on any dock. Mount horizontally or vertically. Protects against nicks and scratches.

Our Price: $29.38
FLOATING DOCK PIPE SLEEVE 2 PC Playstar PS 1080 Commercial Grade Pipe Sleeve, SCH 40, Steel, Galvanized

Holds dock in place while accommodating changing water levels. Two-Piece construction allows pipe to be left in water if dock is removed. Removable insert for various pipe sizes. Accommodates standard 1-5/8" and 1-7/8". O.D. schedule 40 pipe.

Our Price: $30.76
DOCK HINGE KIT FLOATING MARINE PlayStar Commercial Grade Hinge Kit, For Use With Smaller, Lighter Dock Sections

Allows modular connections for working with smaller, lighter dock sections. Connects floating sections together quickly and easily with clevis pin of male/female assembly that bolts to frame kit hole pattern or wherever desired with No.PS1135 hardware kit. Heavy-gauge, hot dipped galvanized steel for long life. Includes male clevis, female clevis, and clevis pin with clip.

Our Price: $33.89
PIPE SLEEVE BUMPR 3.75X4.75X14 Playstar PS 1188 Adjustable Pipe Sleeve Bumper, For Use With Commercial Grade and Standard Pipe Sleeves

Fits PlayStar commercial grade and standard pipe sleeves. Easily adjusts without removal.

Our Price: $45.12
DOCK WHEEL KITS 23 IN DIAMETER Playstar PS 1334 Dock Wheel With 1-5/8 in Dia Hub, For Use With Dock Axle Kit, 23 in Dia

Makes installation and removal of your dock easy with less effort. 23'' diameter wheel with 1-5/8'' diameter hub. For use with dock axle kit.

Our Price: $53.61
DOCK KIT STANDARD 4X6 PLAYSTAR Playstar PS 1405 Standard Dock Kit, For Use With 1-5/8 in OD Pipe and 4 ft x 6 ft Wood Dock Frame, Steel, Beige

Builds 4' x 6' wood dock frame. Powder coated bracket ties 2' x 6' wood frame together for roll or stationary in dock sections. (Lumber and screws sold separately).

Our Price: $65.38
DOCK FLOAT POLY HOLLOW 48X36X9 Playstar PS 1155 Hollow Core Marine Dock Float, Polyethylene

Highly engineered, easy to handle design with large surface area for stability. Built to withstand damaging agents of gas, oil, salt water, and UV light. One-piece design with no seams to leak. Made of environmentally friendly, maintenance-free, automotive-grade fuel-tank, high-density polyethylene. Accessible flanges for easy mounting to frame with No.PS1145 hardware kit. Supports from 33.20 lbs. submerged to 1" to 500.00 lbs. submerged 9".

Our Price: $102.64
DOCK AXLE KIT 4 X 24.75 X 5.25 Playstar PS 1198 Dock Axle Kit

Makes dock installation and removal easy. Kit contains 4 axle brackets, 2 stabilizer braces, 2 nylon axle sleeves and 2 U-Straps. Use with PlayStar dock wheels. Dock pipes required. (Purchased Separately).

Our Price: $136.56
DOCK LADDER ADJ RESIN HVY DUTY Playstar PS 1605 Adjustable Heavy Duty Dock Ladder, 20 in Width, 4/5 Step, Ergonomic Handrails

Resin dock ladder with hot-dipped galvanized mounting brackets and hardware. Adjusts to 4 step (36'') or 5 step (47'') to fit your application. 20'' extra wide opening. Will not crack, fade or rust. No sharp edge. Stays cool to the touch. Easy to install. Tall arch design for stable climbing. Ergonomic hand rails for secure no-slip grip. Deep steps with ribbed surface ensures traction. Made in America. 350 lb. weight rating.

Our Price: $217.05
DOCK KT COMM GRADE 4X10 PLYSTR Playstar PS 1005 Commercial Grade Dock Kit, Steel

Builds 4' x 10' wood dock frame. Heavy duty, hot dipped galvanized components securely ties 2' x 6' wood frame together for stationary, roll in or floating dock sections. (Lumber, screws and components sold separately)

Our Price: $252.50
DOCK TOP RESIN 26.75X25.7X10.5 Playstar PS 1320 Resin Dock Top

Ten 2' x 2' interlocking panels for a 4' x 10' dock section. Maintenance free with slip resistant surface. Use with Commercial Grade or Aluminum Dock Frame Kits.

Our Price: $284.36
DOCK KIT ALUMINUM 4X10 PLAYSTR Playstar PS 1505 Dock Kit, 4 x 10 ft, Aluminum

Contains everything needed to assemble a 4' x 10' aluminum dock frame. Sleek design is made with a strong tempered alloy. Lightweight and durable, each section weighs less than 200 lbs. Can be combined with Resin Dock Top for the quickest assembly. Available as stationary, roll in or floating. Support components sold separately.

Our Price: $559.27