SPRING CLIP GREY 3IN
Made of corrosion-resistant stainless steel. Can be used for both standard mason and walk-through (arch) scaffold frames. Used to hold MetalTech coupling pin on scaffolding frame. Meets ANSI, CSA and OSHA standards. For a hole 1/2 in.
LOCK PIG TAIL
For exterior scaffolding. Meets ANSI, CSA and OSHA standards.1-1/2 x 3 in
PIN COUPLING W/COLLAR 1IN
Replacement coupling pin with 1 in. collar includes locking spring. Rugged steel construction ensures lasting durability. Use with standard or arched scaffold frames. Serves as connector when stacking mason and arch scaffold frames. Tapered end allows for easy stacking. Weather resistant for lasting use. This pin is acceptable for both 1.69 in. and 1.625 in. tube O.D. frames. Meets OSHA standards for safety.
LOCK ARM SCAFFOLD 13IN
Use to lock when stacking frames. Use with standard or arched scaffold frames. Distance between the bolt holes are 13 in. Blue powder-coat for corrosion protection. Meets ANSI, CSA and OSHA standards. Weather resistant.
BRACE SCAFFOLD CROSS 7X4FTX1IN
Designed for scaffold frames that have 4 ft. locking pin spacing. Cross brace must be installed on each leg of a frame or arch frame to reach its full load capacity. Works with both standard and arched scaffold frames for versatile use. Durable construction with 1 in. O.D. galvanized steel tube, 16 ga. Weather Resistant. Meets ANSI, OSHA and CSA standard.
TRAY BAKER TOOL
For use with I-CISC and I-CISCPY scaffolds. Black polypropylene. 30.25 x 20 x 2.75 in.
North American Tool 53502 Portable Work Platform, 225 lb
For painting. Features: safety locking legs and non-skid feet; slip resistant standing surface; lightweight and easy to carry, set up, fold and store; works comfortably along walls and windows. 20" standing height. 39" x 12" surface area.
FRAME SCAFFOLD 60X60IN
Powder coated. Flip locking system. Includes coupling pins and spring-locks. Gravity-lock frame lock. 48in lock spacing. Interior tubes: outside diameter 1 in. - 16 gauge. Perimeter tubes: outside diameter 1.625 in. - 13 gauge. Meets ANSI and OSHA Standards.
OUTRIGGER EXT 32IN
Use to provide additional stability for higher elevations. High performance steel and heavy duty welds for a solid and secure footing. Use with any standard or arched scaffold frames. Blue anti-slip baked on powder coated textured finish for maximum corrosion resistance. Meets OSHA requirements.
PLATFORM WORK TYPEII 225LB
Slip-resistant surface. Easy-use locking hinge. Slip-resistant rubber feet. Height to platform 20?. Work Area: 11-7/8? x 37?. Bottom Width: 15-1/2?. Approx. Spread: 52-1/2?. Approx. Weight (lbs) 10. Approx. Cubes 1.7?.
OUTRIGGERS SET W/CSTR 4-5IN
Specifications: 19.25 x 4.5 x 24 in. assembled, weighs 33 lb, 5 in. double locking heavy duty casters. Includes 4 outriggers, 4 casters and 12 locking pins. Compatible with I-CISC, I-CISCTP and I-CAISC. Meets ANSI, CSA and OSHA standards.
CASTER SCAFFOLDING 500LB 8IN
8 in wheel enables to easily move scaffolding and locks into place for stability and reliability. Secure and safe, use with standard or arch frame. Caster wheels have a 3.88 in Height stem, they do not clamp. Use with locking pin or pigtail lock.