Check Out Our Website!
Want it today?Call our Traverse City or Suttons Bay locations to confirm on-hand inventory!
Want it today? Call to confirm on-hand inventory! In Traverse City: 231-947-1400 and Suttons Bay: 231-271-0010
For use on a variety of exterior wood surfaces, except exotic hardwood. A highly-protective opaque finish with a low-luster sheen that hides wood grain but accentuates texture. Provides a more dirt and mildew resistant finish than standard flat-finish stains. Ideal for all vertical and, especially, for high-traffic horizontal surfaces. Water-repellent. Exceptional UV resistance to slow color fade. Self-priming on most bare or previously coated surfaces. Covers approximately 250-400 sq ft per gallon. Coverage depends on the type, age and texture of the wood and application method.
For use on decks, fencing, wood patios, wood screening, porches, swimming pool walks, outdoor furniture, steps and railings. Water-repellent. For use on most types of lumber such as cedar, fir, pine, cypress, spruce, redwood and pressure-treated wood. Dries to a natural, flat finish. Covers 400-600 sq. ft. per gallons.
The 100-percent Acrylic formulation provides excellent adhesion and durability and protects wood from moisture and sun damage while adding a rich, opaque color. Rain-free window requirement of only 12 hours which allows for more working days and faster job completion after product application. Recommended for use on any properly prepared exterior wood, including decks, fences, siding, railings, outdoor furniture and other wood surfaces. Apply to new, dry, pressure-treated wood, uncoated new or weathered wood, or wood previously stained or painted. Application down to 35-degree F and as high as 120-degree F. Covers approximately 350 to 500 sq. ft per gallon. Coverage will vary depending on the type, age and texture of the wood. Warranted for 25 years on fences or siding and 10 years on decks.
Super penetrating, high quality, oil base transparent stain. It is specially formulated for mahogany, teak, ipe, meranti, and iron wood used for exterior decking and patio furniture. This unique blend of oils and iron oxide pigments penetrates and protects hardwoods. Provides protection from UV, water damage, and surface stains caused by mildew. Approved for MPI #33. Covers 400-600 sq. ft. per gallon on smooth surfaces and 250-350 sq. ft. per gallon on rough surfaces. One coat coverage.
Water-repellent. Mildew-resistant. For use on most types of smooth and rough wood, including siding, shingles, shakes and trim. For use on seasoned lumber such as cedar, redwood, fir, pine, cypress, spruce, pressure-treated wood and plywood panel siding. Dries to a uniform, flat finish. On smooth surfaces, covers 400-500 sq. ft. per gallon; On rough surfaces, covers 150-250 sq. ft. per gallon.
Combination of color and U.V protection with alkyd resin. Durable and formulated to withstand foot traffic and wear. For use on most types of wood including pressure-treated pine, red and white cedar, fir, cypress, redwood and on hardwoods. Dries to a uniform opaque finish. On smooth surfaces, covers 400-500 sq. ft. per gallon; On rough surfaces, 250-350 sq. ft. per gallon.
Back to top