Check Out Our Website!
Want it today?Call our Traverse City or Suttons Bay locations to confirm on-hand inventory!
Want it today? Call to confirm on-hand inventory! In Traverse City: 231-947-1400 and Suttons Bay: 231-271-0010
Formulated to precede the application of Clear Wood Finish Brushing Lacquer. The sanding sealer serves as the base coat and is designed to seal and protect the surface. Ideal for stained or bare wood surfaces, including furniture, floors, cabinets, doors and trim. Seals the wood pores which allows the top coat go further.
Seals and protects wood surfaces and can be used to prepare surfaces for the application of a clear topcoat finish. May be applied to all types of bare or stained woods; also recommended as a sandable basecoat or sealer and promotes a smooth, fine finish; contains no stearates.
Universal sealer formulated to work under all clear wood finishes, Oil or water-based polyurethane, lacquers and shellac. Seals wood and is easy to sand. Low odor.
Penetrates wood pores deeply to seal and protect wood. Use as a pre-stain conditioner for all wood stains. Apply over new wood or over existing finishes. Compatible with all clear finishes. Tough, non-yellowing finish. Dries in minutes; easy to sand; recoat in less than 1 hour.
Penetrates wood pores deeply to seal and protect wood. Use as a pre-stain conditioner for all wood stains. Compatible with all clear finishes, including oil- and water-based polyurethane, lacquer and shellac. Can be used on new wood or over existing finishes. Use in SCAQMD regulated areas. Tough, non-yellowing finish. Covers approximately 400-600 sq. ft. per gallon depending on application method and surface.
Clear sealer formulated for application over bare wood. Seals wood grain. Designed to be sanded providing a smooth finish. Can be top coated with any Minwax oil or water-based polyurethane finish. Covers approximately 500 sq. ft. per gallon.
Back to top